HONDA 2005 Civic Sedan - Owner's Manual - Manual (Page 66)

Turn Signal
Off
Parking and interior lights
Headlight on
High beams
Flash high beams
Push down on the
left lever to signal a left turn and up
to signal a right turn. To signal a lane
change, push lightly on the lever and
hold it. The lever will return to
center when you release it or
complete a turn.
To flash the high beams, pull the
lever back lightly, then release it.
The high beams will stay on as long
as you hold the lever back.
The headlights revert to normal
operation when you turn them on
with the switch.
With the headlight switch off, the
high beam headlights come on with
reduced brightness when you turn
the ignition switch to ON (II) and
release the parking brake. They
remain on until you turn the ignition
switch off, even if you set the
parking brake.
Push the lever back
until you hear a click to turn on the
high beams. The blue high beam
indicator will come on (see page
).
Pull the lever back again to low
beams.
Turning switch to the
position turns on the parking
lights, taillights, instrument panel
lights, side-marker lights, and rear
license plate lights. Turning the
switch to the
position turns on
the headlights. If you leave the lights
on with the key removed from the
ignition switch, you will hear a
reminder tone when you open the
driver’s door. 1.
2.
3.
4.
5.
6.
58
Turn Signal and Headlights Turn Signal
(Canadian Models)
Daytime Running Lights
High Beams
Headlights
Turn Signal and Headlights
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
65
Main Menu Table of Contents