Instrument panel indicators – HONDA 2006 CR-V - Owner's Manual User Manual
Page 63
If you exceed 10,000 miles (16,000
km) without having the scheduled
maintenance performed, this
indicator will remain on as a constant
reminder.
Your dealer will reset this indicator
after completing the scheduled
maintenance. If this maintenance is
done by someone other than your
dealer, reset the indicator as follows.
Turn off the engine.
Press and hold the Select/Reset
button on the instrument panel,
then turn the ignition switch to the
ON (II) position.
Hold the button for about 10
seconds until the indicator goes
off.
This indicator comes on when the
washer fluid level is low. Add washer
fluid when you see this indicator
(see page
).
This indicator reminds you that it is
time to take your vehicle in for
scheduled maintenance.
Refer to the maintenance schedule
for normal and severe driving
conditions on pages
and
.
For the first 8,000 miles (12,800 km)
after the maintenance required
indicator is reset, it will come on for
2 seconds when you turn the ignition
switch to the ON (II) position.
Between 8,000 miles (12,800 km)
and 10,000 miles (16,000 km), this
indicator will come on for 2 seconds
when you first turn the ignition
switch to the ON (II) position, and
then flash for 10 seconds.
1.
2.
3.
Canadian models only
Instrument Panel Indicators
Washer Level Indicator
Maintenance Required
Indicator
60
SELECT/RESET BUTTON
Main Menu
Table of Contents