beautypg.com

Installing a child seat – HONDA 2006 CR-V - Owner's Manual User Manual

Page 44

background image

Place the child seat on the vehicle
seat, then attach the seat to the
lower anchors according to the
child seat maker’s instructions.

Your vehicle is equipped with
LATCH (lower anchors and tethers
for children) at the outer rear seats.

Make sure there are no objects
near the anchors that could
prevent a secure connection
between the child seat and the
anchors.

Move the seat belt buckle or
tongue away from the lower
anchors.

To install a LATCH-compatible child
seat:

Some LATCH-compatible seats
have a rigid-type connector as
shown above.

The lower anchors are located
between the seat-back and seat
bottom, and are to be used only with
a child seat designed for use with
LATCH.

The location of each lower anchor is
indicated by a small button above the
anchor point.

1.

2.

3.

CONTINUED

Installing a Child Seat

Installing a Child Seat with
LATCH

Dr
iv

er
and

P

asseng

er
Saf

e

ty

41

LOWER ANCHORS

Rigid type

BUTTON

Main Menu

Table of Contents