HONDA 2006 CR-V - Owner's Manual - Manual (Page 59)

The instrument panel has many
indicators that give you important
information about your vehicle.
See page .
If this indicator comes on when the
engine is running, the battery is not
being charged. For more information,
see page
.
The engine can be severely damaged
if this indicator flashes or stays on
when the engine is running. For
more information, see page
.
This indicator has two functions:
This indicator comes on when you
turn the ignition switch to the ON
(II) position. It reminds you and your
passengers to fasten your seat belts.
A beeper also sounds if you have not
fastened your seat belt.
If you continue driving without
fastening your seat belt, the beeper
sounds and the indicator flashes
again at regular intervals.
If it remains on after you have
fully released the parking brake
while the engine is running, or if it
comes on while driving, there
could be a problem with the brake
system. For more information, see
page
.
It comes on when you turn the
ignition switch to the ON (II)
position. It is a reminder to check
the parking brake. Driving with
the parking brake not fully
released can damage the brakes
and tires.
If you do not fasten your seat belt,
the beeper will stop after a few
seconds but the indicator stays on
until you do. Both the indicator and
the beeper stay off if you fasten your
seat belt before turning on the
ignition switch.
2.
1.
234
233
233
235
Malf unction Indicator
Lamp
Low Oil Pressure
Indicator
Charging System
Indicator
Seat Belt Reminder
Indicator
Parking Brake and Brake System
Indicator
Instrument Panel Indicators
56
U.S. Canada
Main Menu Table of Contents