beautypg.com

Lights – HONDA 2006 CR-V - Owner's Manual User Manual

Page 206

background image

CONTINUED

The headlights were properly aimed
when your vehicle was new. If you
regularly carry heavy items in the
cargo area or pull a trailer,
readjustment may be required.
Adjustments should be done by your
dealer or other qualified mechanic.

Your vehicle has halogen headlight
bulbs. When replacing a bulb, handle
it by its base, and protect the glass
from contact with your skin or hard
objects. If you touch the glass, clean
it with denatured alcohol and a clean
cloth.

Remove the electrical connector
from the bulb by pulling the
connector straight back.

Remove the rubber weather seal
by pulling on the tab.

Unclip the end of the hold-down
wire from its slot. Pivot it out of
the way, and remove the bulb.

1.

2.

3.

Headlight Aiming

Replacing a Headlight Bulb

Lights

Ma

int
e

na
nce

203

WEATHER SEAL

BULB

CONNECTOR

Low Beam Headlight

HOLD-DOWN WIRE

Halogen headlight bulbs get very hot
when lit. Oil, perspiration, or a scratch
on the glass can cause the bulb to
overheat and shatter.

Main Menu

Table of Contents