Installing a child seat – HONDA 2007 CR-V - Owner's Manual User Manual
Page 49
Follow step 1 through 5 as
described previously to secure the
child seat.
Pull down the cover to access the
tether anchor.
Route the tether strap over the
seat-back, then attach the tether
strap hook to the tether anchor in
the ceiling, making sure the strap
is not twisted. Tighten the strap
according to the seat maker’s
instructions.
To install a LATCH-compatible child
seat in the rear center seating
position, use the center lower
anchors as shown above.
Route the tether strap over the
seat-back, then attach the tether
strap hook to the anchor, making
sure the tether strap is not twisted.
Tighten the strap according to the
seat maker’s instructions.
Push and pull the child seat
forward and from side-to-side to
verify that it is secure.
Push and pull the child seat
forward and from side-to-side to
verify that it is secure.
Reinstall the dual deck cargo shelf.
1.
2.
3.
4.
7.
8.
9.
10.
Using the Center LATCH
Installing a Child Seat
Dr
iv
er
and
P
asseng
er
Saf
e
ty
45
TETHER STRAP HOOK
TETHER
ANCHOR
TETHER STRAP HOOK
TETHER ANCHOR
CENTER LOWER ANCHORS
COVER
TETHER ANCHOR
Main Menu
Table of Contents