Automatic transmission – HONDA 2007 CR-V - Owner's Manual User Manual
Page 237
Use neutral if you
need to restart a stalled engine, or if
it is necessary to stop briefly with
the engine idling. Shift to the Park
position if you need to leave your
vehicle for any reason. Press on the
brake pedal when you are moving
the shift lever from neutral to
another gear.
Use this position for
your normal driving. The
transmission automatically selects a
suitable gear (1 through 5) for your
speed and acceleration. You may
notice the transmission shifting up at
higher engine speeds when the
engine is cold. This helps the engine
warm up faster.
Press the D3 switch on the side of
the shift lever to turn this mode on
or off; the D3 mode indicator comes
on whenever the D3 mode is
selected.
D3 mode can be turned on or off
only when the ignition switch is in
the ON (II) position and the shift
lever is in the D position.
When the D3 mode is on, the
transmission selects only the first
three gears. Use D3 mode when
towing a trailer, or to provide engine
braking when going down a steep hill.
D3 mode can also keep the
transmission from cycling between
third and fourth gears in stop-and-go
driving.
CONTINUED
Neutral (N)
Drive (D)
Automatic Transmission
D3 Mode
D
riv
ing
233
D3 MODE INDICATOR
D3 SWITCH
Main Menu
Table of Contents