beautypg.com

Installing a child seat – HONDA 2014 Ridgeline - Owner's Manual User Manual

Page 52

background image

After confirming that the belt is
locked, grab the shoulder part of
the belt near the buckle, and pull
up to remove any slack from the
lap part of the belt. Remember, if
the lap part of the belt is not tight,
the child seat will not be secure.

Push and pull the child seat
forward and from side-to-side to
verify that it is secure enough to
stay upright during normal
driving maneuvers. If the
child seat is not secure,
unlatch the belt, allow it to retract
fully, then repeat these steps.

To remove slack, it may help to
put weight on the child seat, or
push on the back of the seat while
pulling up on the belt.

To deactivate the lockable retractor
and remove a child seat, unlatch the
buckle, unroute the seat belt, and let
the belt fully retract.

4.

5.

Installing a Child Seat

47

12/08/09 16:05:21 31SJC670_054

Dr
iv

er
and

P

asseng

er
Saf

e

ty

2014 Ridgeline