beautypg.com

Lights – HONDA 2014 Ridgeline - Owner's Manual User Manual

Page 343

background image

Remove the three mounting
screws from the light assembly.

Remove the lens from the
light assembly.

Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.

Place a cloth on the edge of the
lens segment to prevent scratches.
Remove each lens segment by
carefully prying on its edge with a
small flat-tip screwdriver.

Remove the screw under each lens.

Pull the high-mount brake light
assembly out of the vehicle.

Install the new bulb into
the socket.

Push the socket into the light
assembly, and turn it clockwise
until it locks.

Turn on the lights to make sure
the new bulb is working.

Install the rear light assembly in
the rear pillar. Tighten the two
bolts securely.

1.

2.

3.

4.

5.

6.

6.

7.

8.

9.

Replacing a High-mount Brake
Light Bulb

Lights

338

LENS SEGMENT

SCREW

SCREW

BULB

12/08/09 16:43:48 31SJC670_345

Ma

int
e

na
nce

2014 Ridgeline