Changing the engine oil and filter – HONDA 2014 Ridgeline - Owner's Manual User Manual
Page 330
Open the hood, and remove the
engine oil fill cap. Remove the oil
drain bolt and washer from the
bottom of the engine. Drain the oil
into an appropriate container.
You may use a synthetic motor oil if
it meets the same requirements
given for a conventional motor oil: it
displays the API Certification Seal,
and it is the proper weight. You must
follow the oil and filter change
intervals shown on the odometer/
trip meter display or on the multi-
information display.
Your vehicle does not require any oil
additives. Additives may adversely
affect the engine or transmission
performance and durability.
Changing the oil and filter requires
special tools and access from
underneath the vehicle. The vehicle
should be raised on a service station-
type hydraulic lift for this service.
Unless you have the knowledge and
proper equipment, you should have
this maintenance done by a skilled
mechanic.
Run the engine until it reaches
normal operating temperature,
then shut it off.
Always change the oil and filter
according to the maintenance
messages shown on the information
display or multi-information display
(depending on the model). The oil
and filter collect contaminants that
can damage your engine if they are
not removed regularly.
1.
2.
CONTINUED
Synthetic Oil
Changing the Engine
Oil and Filter
Engine Oil Additives
Adding Engine Oil, Changing the Engine Oil and Filter
325
WASHER
DRAIN BOLT
12/08/09 16:42:00 31SJC670_332
Ma
int
e
na
nce
2014 Ridgeline