Platinum – Haltech HT045505 User Manual
Page 3
Notes
PLATINUM
Sport 2000
Nissan RB30 Series Terminated Engine Harness
Quick Start Guide
Congratulations on purchasing a Haltech Engine Management Terminated Engine
Harness. This Plug and Play product allows you to be up and running in a few hours.
The Harness when installed in conjunction with a Haltech Platinum Sport 2000 opens
the door to virtually limitless performance modification and tuning of your vehicle.
Programmable systems allow you to extract all the performance from your engine by
delivering precisely the required amount of fuel and ignition timing that your engine
requires for maximum output under all operating conditions.
This quick start guide will walk you through installation of the Haltech Nissan RB30
Series Terminated Engine Harness into a vehicle. This guide is accompanied by the full
service manual located on the software CD provided with the ECU that you or your tuner
will need to refer to before completing your installation and configuration.
The Manual can also be downloaded from the Haltech web
Supported Engine
The Haltech Nissan RB30 Series Terminated Engine Harness supports the following
engine configurations:
•
Nissan RB30 Series Engine
Supported ECU
•
Haltech Platinum Sport 2000
Included in Haltech ECU Kit (HT051412)
•
Platinum Sport 2000 ECU
•
Nissan RB30 Series Terminated Engine Harness
•
LS1 Coil with built in ignitor
•
LS1 Coil Mounting Bracket and spacers
•
Deutsch Connector Pack
•
Haltech Air Temperature Sensor
•
Haltech Coolant Temperature Sensor
Optional Accessories ( Sold Separately )
•
WBC1 Single Channel CAN Wideband Controller (HT059970)
•
Wideband Sensor only- Bosch LSU 4.2 (HT010714)
•
02 Sensor Weldable Fitting Bung and Blanking Plug M18x1.5 (HT010702)