Cobalt Networks AES Audio Delay 9301 - Manual (Page 15)

CDI-9323 User Manual
••••
(V 0.5) Page 15 of 20
Save Settings
In this parameter, move the toggle switch up to save the settings to the card persistent storage.
Load Settings
In this parameter, move the toggle switch up to load the saved settings and make them active.
Restore Factory Settings
In this parameter, move the toggle switch up to make the factory default settings active, and make the
stored settings equal to the factory settings.
Factory Default Settings
The factory default settings are as follows
1) AES audio inputs 1-16 are mapped to discrete AES outputs 1-16
2) Audio gain is set to 0dB and polarity is set to normal on all channels.