Great Planes Factor 3D ARF - GPMA1552 - Manual (Page 13)

13
Install the Wheel and Wheel Pants
❏ ❏
1. Secure the wheel pant to the landing gear with a 2-56

1" [2

25 mm] screw and 2-56 nylon stop nut.
❏ ❏
2. Slide the wheel onto screw. Install another nylon stop
nut onto the end of the screw to secure the wheel.
❏ ❏
3. Set the position of the wheel pants and secure the
pant to the landing gear with a 1/16"

1/4" [1.6

6 mm] wood
screw. Do this for both wheel pants.
❏
3. Locate the parts shown. Install the set screw into the
wheel collar.
❏
4. Install the nylon bushing into the fuselage.
❏
5. Assemble the remaining components as shown here.