Great Planes Plan Protector - GPMR6167 - Manual

Instructions for Use
Great Planes Plan Protector keeps your kit plans in crisp, clean, perfect
condition – from the day you first unroll them onto the building board to the
moment you finish assembly. Unlike wax paper, Plan Protector also resists
modeling adhesives...so you won’t have to peel and sand paper scraps away
from glued joints. Each roll of Plan Protector contains a generous 25 feet of
the durable, clear material. It’s simple to use – just follow the steps below.
1. Lay your kit’s plan sheet flat on the table or building board and tape down
the edges.
HINT: If the plan sheet is large, cut a small flap near the center. Lift the flap and tape
the sheet to the building surface here as well as at the edges (see illustration #1). This
will keep the middle of the plan sheet from slipping while you build.
2. Next, cut a section of Plan Protector that’s several inches larger than the
plan sheet itself. Tape or pin it to the building surface, outside the perimeter of
the plan sheet (see illustration #2). Now you’re ready to begin building!
3. Replace the Plan Protector as often as necessary to have a clean, clear
view of your kit plans.
© 2011 Hobbico ® , Inc. All rights reserved. PLANP01
Plan
illustration #1
Plan Protector
illustration #2
60"RETRACTABLE TAPE MEASURE
HCAR0478
Includes standard and metric scales on
opposite edges. Metal hook on leading edge
allows one–man, no–slip measuring.
GREAT PLANES ®
EASY-TOUCH ™ SANDERS
More comfortable and accurate than ordinary
T–bar sanders! Easy–Touch sanders feature a
wide handle that’s specially contoured for the
human hand. Made from .055" thick aluminum
to resist bending. Bar sanders are available in
sizes suited for every sanding job, from detail
areas to large–scale wings.
Special rolls of adhesive–backed sandpaper are
cut to the perfect width for Easy-Touch sanders.
GPMR6180 .... 80–grit sandpaper—12' roll
GPMR6183 .. 150–grit sandpaper—12' roll
GPMR6185 .. 220–grit sandpaper—12' roll
GPMR6189 .. Hand Sander Sandpaper Asst. (6)
48" BENCH RULER
HCAR0465
Adhesive–backed...mounts permanently to
your workbench for quick, easy measuring
while building. Features standard scale on one
edge, metric on the other.
GPMR6169 ..Easy–Touch Hand Sander -5.5"
GPMR6170 ..Easy–Touch Bar Sander -11"
GPMR6172 ..Easy–Touch Bar Sander -22"
GPMR6174 ..Easy–Touch Bar Sander -33"
BUILDER'S RULER
HCAR0482
Multi–purpose measuring tool includes inch/
metric scales; protractor; thickness and hole
gauge; circle template; and upright slot for
squaring ribs.
BUILDER'S TRIANGLE SET
HCAR0480
2–piece set has 30/60° and 45° triangles.
Triangles interlock to create an angle guide
for squaring in 2 dimensions.
MORE ESSENTIAL PRODUCTS FOR
EASIER KIT ASSEMBLY!
PRINTED IN USA
Patent Pending