Grant – Grant Instruments Transportable Incubator User Manual
Page 4
Part number 18260 4
13/04/2006
3
Controls and indicator lamps
Case rear view (Figure 1)
Control Panel (Figure 2)
The
run/charge switch when in the run position is used to start unit and in the charge position
charges the internal battery.
The temperature display normally shows the block temperature in
°C.
The
set temperature
°C is set to 37°C and can be adjusted on temperature controller.
The
red LED when illuminated indicates 240V mains power operation.
The
yellow LED when illuminated indicates 12V Dc power operation.
Grant
Set Temperature
1AF 5AF
Fuses
Run
Charge
Controller temperature
display (see fig 3)
Fuses
Run/Charge Power Switch
Red L.E.D Power Indicator (240V)
Block
Yellow L.E.D indicator (12V)
12V Cigar lighter plug
12V Dc Cable
IEC Mains
Socket