GME TX650 - Manual (Page 9)

TX650 INSTRUCTION MANUAL PAGE 9
MeNU FUNCTIONS
Display Functions Settings
‘flashing’ Change Channel 01 ‑ 40
CTC Change Privacy Code 01 ‑ 38, of
Po Set TX Power Lo, HI
dh Select Dual Watch Mode 01 ‑ 40, of
Uo Select Hands free (VOX) Lo, HI, of
rb Activate Rodger Beep on / of
bP Activate Key Beep on / of
bb Activate Room Monitor on / of
CA Change Call Tone 01 ‑ 03
VOLUMe LeVeL
There are 7 volume levels to suit your personal preference. To adjust the volume
level, press the or button. ‘UL’ with be displayed along with a volume level
setting between 1 and 7. A beep tone will also indicate an increase or decrease
in volume.
Note: The volume level cannot be adjusted when Scan or Dual Watch modes
are selected.
ChANNeLS
This radio communicates on 38 of the available 40 UHf CB channels (channels
and 3 are reserved for telemetry use and are disabled for voice transmissions).
To communicate with other UHf CB radios, all units must be switched to the
same channel.
To change the radio channel
Press the MOD
e button. The channel number will flash. Use the or buttons
to select the desired channel. Press the pTT button or wait for 5 seconds to store
your choice.