Warranty – GME TX4400 User Manual

Page 24

PAGE 24

INSTRUCTION MANUAL

TX4400

Part Number: 310179 Drawing Number: 41178-7

WARRANTY

GME limit this warranty to the original purchaser of the
equipment.

GME warrant the TX4400 to be free from defects in material
and workmanship for a period of twenty four (24) months
from the date of purchase from their authorised retailer.

GME warrant the microphone to be free from defects
in material and workmanship for a period of twelve
(12) months from the date of purchase from their
authorised retailer.

Should the product require servicing during this period, all
labour and parts used to effect repairs will be supplied free
of charge. GME reserve the right to determine whether
damage has been occasioned by accident, misuse or
improper installation whereby the warranty would be void,
including equipment which has been damaged due to:

(a) Incorrect or reverse polarity connection to a battery

power supply.

(b) Connection to incorrect supply voltage.

antenna which has been incorrectly installed, resulting in
damage to the radio’s output circuit.

(d) Effects of water or moisture penetration.

(e) Non-factory modifications.

Procedure to be followed by claimant: In the event of a
defect occurring during the warranty period, the original
purchaser may return the defective unit along with suitable
proof of purchase date (i.e. receipt, docket, credit card slip
etc.) and a full description of the defect to the retailer from
whom the unit was purchased. All freight charges incurred
for transportation by the retailer or GME are the purchaser’s
responsibility.

The retailer will forward it to the closest authorised GME
Radio Service Depot in your particular State

GME AFTER SALES SERVICE

Your GME radio is especially designed for the environment
encountered in mobile installations. The use of all solid state
circuitry, careful design and rigorous testing, result in high
reliability. Should failure occur however, GME maintain
a fully equipped service facility and spare parts stock to
meet the customer’s requirements long after expiry of the
warranty period.