GME GX400B - Manual (Page 18)

1 8 I N S T R U C T I O N M A N UA L G X 4 0 0
SPECIFICATIONS*
GENERAL
Complies with: AS4367:2007
Frequency Range: 26 – 30 MHz
Channel Set: Australian 27 MHz CB (26.965 – 27.405 MHz)
Australian Marine (27.680 – 27.980 MHz)
Modulation: AM (A3E)
Supply Voltage: • 12 V DC nominal
• 10.8 – 15.6 V DC range
Frequency Error: ±1.4 kHz
Dual Watch: Monitor time – 250 ms
Scan Rate: 5 channels/second
TRANSMITTER
Modulation Frequency Response: 300 Hz to 3 kHz, + 1 – 3 dB
Max Modulation Depth: 100%
Carrier Output Power: 4 watts max
Spurious Emissions: < – 26 dBm
RECEIVER
Demodulated Frequency Response: 300 Hz to 3 kHz, + 1 – 3 dB
Receive Sensitivity for 12 dB
SINAD @ 30%Modulation: – 110 dBm
Max Squelch: < – 65 dBm
Adjacent Channel Sensitivity: ≥ 55 dB
Spurious Response Immunity: ≥ 55 dB
Conducted Spurious Radiation ≤ – 57 dBm
Audio Output Power 8 Ohms: 2.5 watts
MECHANICAL
Dimensions: 68 (H) x 74 (D) x 169 (W) mm
Weight: 450 grams
ENVIRONMENTAL
Temperature Range: – 0°C to + 55°C
The GX400 will operate over the 26 – 30 MHz frequency range. For information specific to
frequencies outside of the Australian Marine or the Australian and New Zealand CB bands,
please refer to the appropriate amendment, or contact GME at: [email protected]
*All specifications are typical and subject to change without notice or obligation.