GIN Boomerang 10 - Manual (Page 33)

33 /62 Boomerang 10
WARNING Uncontrolled flight positions are outside the manufacturer limits of the paraglider.
This may cause a general deterioration in flight characteristics, premature ageing,
or even structural failure.
Repairs
Gin Gliders workshops
All repairs and servicing should be carried out by a Gin Gliders authorised workshop or directly
by Gin Gliders. Gin Gliders workshops have trained staff, original Gin Gliders parts and the
necessary know-how, all of which will ensure top quality.
Major repairs at the Boomerang 10, such as replacing panels, should only be carried out by the
distributor or manufacturer.
Small repairs to the glider
Very small holes in the sail can be repaired with the sticky back tape provided with your glider.
Damaged lines should be replaced by your GIN dealer. Before fitting a replacement line, check it
for length against its counterpart on the other side of the wing. When a line has been replaced,
always inflate the glider on flat ground to check that everything is in order before flying.