Canon Projector LV-8235 UST - Manual (Page 40)

0
Chapter 4 Controlling the Projector
Setting 1
Item Description
Language .............. Sets the language display of projector's
on-screen display menu.
Auto setup ........... Executes the Auto input, Auto PC,
and Auto keystone functions below
according to the each setting after
clicking Start button.
Auto input ......... Sets the auto-input signal detection
mode. (ON1, ON2, OFF)
Auto PC ............... Sets the auto PC adjustment mode.
(ON, OFF)
3D setting ............. Sets 3D display functions.
3D. ..........................Starts 3D projection.
(ON, OFF, NVIDIA 3D VISION)
3D sync ................ Switches the 3D sync signal when not
getting correct 3D image. {1(=default), 2(=inverted)}
3D-->2D .............. Sets the 2D mode when viewing 3D contents without 3D glasses. (ON, OFF)
3D phase ............ Adjusts the 3D sync output signal from the projector to external emitter system. (0-31)
Zoom ....................... Sets reset or store the adjustment value with ZOOM+/– buttons on the projector.
(Reset, Store1, Store2)
Background ......... Sets the screen background when no signal input. (Blue, User, Black)
Display .................... Switches on or off the on-screen menu display on the screen. (OFF, Countdown off, ON)
Countdown off .......Displays image during the starting up.
Logo ......................... Sets on or off the logo display on the screen during the startup. (OFF, Default, User)
Item Description
Ceiling ..................... Sets the image top/bottom and left/
right reversed. (ON, OFF)
Rear ........................... Sets the image left/right reversed. (ON,
OFF)
Screen aspect .... Sets the aspect. {Default(16:10), 16:9,
4:3}
* When 4:3 or 16:9 is selected, some
Screen modes are limited. (+ p.39)
Colorboard .......... Sets the similar color of the wall or the school blackboard. {OFF, Red, Yellow, Blue,
Green, Blackboard(Green)}
Reset......................... Resets the Screen settings.
Continue from the previous page.