Char-Broil 463821909 - Manual (Page 19)

19
5
6
Attach control panel to firebox using #10-24 x ½” machine screws, silicon washers and #10-24 flange nuts.
#10-24
Flange Nut
Qty. 4
A Place firebox onto cart, make sure the regulator hose hangs inside cart and control panel overlaps front panel.Attach to cart with
#10-24x1-1/4" machine screws, Silicon washers and #10-24 flange nuts.
B Place burners assembly into firebox, making sure valves are inside the burner tubes. Attach to firebox with
machine screws and silicon washers.
C Attach wire of main burner to ignitor.
#10-24 x ½”
Silicon Washer
Qty. 4
#10-24 x ½”
Machine Screw
Qty. 4
Firebox
Control Panel
Silicon Washer
Qty: 6
Firebox
Front Panel
#10-24
Flange Nuts
Qty. 4
A
B
Correct burner-to-valve engagement
Burner Assembly
C
#10-24 x ½”
Machine Screws
Qty. 2
#10-24x1-1/4"
Machine Screw
Qty: 4