Garelick 48251 251 SEWN SEAT - Manual

Assembly Instructions for
Boat Seats
Form 12.137
ASSEMBLY INFORMATION
This instruction sheet is designed to aid in the assembly of
several boat seat models. For the assembly of your particular
seat, simply follow the sections below that pertain to it.
ARM EXTRUSION ATTACHMENT
1. Position the arm extrusions on the seat bottom and align
the holes of both; secure each extrusion with two 1/4-20
x 1-1/4" machine screws (A) as illustrated.
ARM REST ATTACHMENT
1. Position the arm rests on the flat plates of the arm
extrusions so that the staples in the end of the rests will
face toward the REAR of the seat when mounted (see
illustration).
2. Align the holes of the flat plate and arm rest; secure with
two #14 x 1-3/4" sheet metal screws (A) as illustrated.
SEAT BACK ATTACHMENT
1. Position the seat back extrusions on the seat bottom and
align the holes of both; secure the seat back to the seat
bottom with four 1/4-20 x 1-1/4" machine screws (A) as
illustrated.
CARE AND MAINTENANCE
CAUTION: This seat should only be cleaned with mild soap and
a non-abrasive sponge or cloth.
FIG. 1
Write for
a Complete
Catalog
Phone: 651-459-9795
PO Box 8, 644 2nd Street E-mail: [email protected]
St. Paul Park, Minnesota 55071 On the Web: www.garelick.com
2/99