Galaxy Audio TRAVELER AS-TV10 User Manual
Page 14
F. Wireless Mic/Audio link Receiver (AS-TVREC) (see page 9)
This system may include one or two receivers with selectable PLL 96 channel
operation. These modules receive signals from wireless Mics or from another
Traveler equiped with an Audio Link Transmitter.
1. Turn the power switch
(F7) clockwise to turn on the receiver.
2. The LCD display
(F1) will show “On” and the channel that was last in use
when the unit was turned off.
3. To select a different channel, press the set button
(F5). The channel number
will flash in the in LCD display. Press the up or down button
(F6) to select a
channel to use, and then press the set button. After a channel has been set,
press either the up or down button to display the frequency of the selected
channel.
4. Adjust the volume control to the desired level.
5. When receiving signal, the A/B diversity indicator
(F2) will light RED or Green
to show the normal condition. The RF indicator
(F3) will light to show RF
received and the AF indicator
(F4) will show audio received.
G. Anti-Shock CD/CMP Player (RM-CD) (see page 9)
1. Push the power switch
(G2) to turn on the player. Put a CD in the CD slot
(G10) or push the Stop/Eject button (G5) to take a CD out of the slot.
2. Press the Play/Pause button
(G8) to start or pause CD/MP3 play .Turn the
volume control
(G9) to adjust to the proper volume. Push the Stop/Eject button
to stop or change the CD or CMP (Compressed Media Player) disc.
3. Press the Forward
(G7) or Reverse (G6) button to skip forward to the next rack
or reverse to the previous track. Holding down the Forward or Reverse button
will continuously forward or reverse the tracks.
4. Repeat/Shuffle
(G4) has three modes:
1. Repeat one song
2. Repeat all songs
3. Shuffle for random play.
5. Create Program Playlist:
Step 1: Press Prog button
(G1) to begin setting up the program playlist
Step 2: Select a song (see step 3 and 6)
Step 3: Press Repeat
(G4) to enter the song. Repeat steps 2 and 3 to enter
additional songs.
Step 4: Press Play
(G4) to play the programmed songs in memory
*Please note that the program will reset once the Program button is pressed
again.
6. To select a folder from an CMP, press Folder button
(G11). Use Forward or
Reverse buttons to select a song.