Galaxy Audio RM10 - Manual (Page 5)

3 RM10
Using the RM10:
The following illustration shows just some of the many ways the
RM10 may be connected with other audio devices. For best
performance, always use high quality shielded cables of the
correct type. Switch the power on and turn all Volume Controls
to minimum before connecting other audio devices to the RM10.
Input Channels:
Input Channels are labeled 1 through 10 and are located on the
back of the unit. Inputs 1 through 8 are Balanced 3 Pin Phoenix
Block connectors. Channel 9 though 10 accepts Stereo RCA
Jacks. Channel 10 also has an additional 1/8" Stereo Summing
Input Jack located on the front of the unit next to the Channel 10
Volume control.
*iPod is a registered trademark of the Apple Company Inc.