Combi 8000 Series User Manual
Page 30
The vehicle lap belt must be tight around the car seat and must stay tight. Check
for a secure installation - pull front to back and side to side. If the car seat is not
tightly secured, remove the belt lock-off and repeat steps 1 and 2.
If car seat cannot be held tightly, check vehicle owner’s manual, see “Vehicle Seat
Belt” section or move it to another seating location. If there is not a location that
will keep the car seat secured with the lap belt, contact your vehicle dealer to have
a lap belt installed in your vehicle.
To remove the belt lock-off:
Release seat belt buckle.
Pivot lock tab up and open belt lock-off.
29
5
1
2
TICS1203e (EN).qxd 4/4/05 4:15 PM Page 30