Philips AZ 2908 - Manual (Page 14)

CD PLAYER
Programming track numbers
You may select a number of tracks and store these in the memory
in the desired sequence. You may store any track more then once.
At most, 20 tracks can be stored in the memory.
1 Select the desired track with SEARCH !♦< or ►«.
2 As soon as the desired track is displayed, press the PROGRAM
button to store the track in the memory.
-► On the display program appears. The number of the stored
track, Pr and the total number of stored tracks is shown.
3 Select and store in this way all desired tracks.
4 You can review your settings by pressing the PROGRAM button
for more than 2 seconds.
-► The display shows all stored track numbers in sequence.
Notes: - When you try to store more than 20 tracks the display
shows'rUi L.
- When you press PROGHAM and there is no track selected
the display shows 5 E i £ C E.
B P r : H
ri II I
r U L L
L L ) CTL
t_ C L- t
Playing the program
If you have selected the tracks in the stop position, press
PLAY-PAUSE HI.
If you have selected the tracks during CD playback, press first
STOP* and then press PLAY-PAUSE HI.
l U B 3 S B
Erasing the program from the stop position
From the stop position, press STOP«.
-► CLEPlr lights up briefly, PROGRAM disappears and your
program is erased.
Notes: The program will also be erased if you:
- interrupt the power supply,
- open the tray,
- press the POWER button.
L L E F I r
14