Philips AZ 2908 - Manual (Page 12)

RADIO CD PLAYER
m
a
(a
3 Press PROGRAM to enter the programming mode.
-► During programming,
program
flashes on the display.
4 Press PRESET A or T to allocate a number from 1 to 29 to the
preset station.
5 Press PROGRAM to confirm the setting.
Tuning to preset stations
• Press PRESET A or T until the desired preset number appears
on the display.
ITirTTp^'^
inn
I.UU
Playing a CD
1 Select the CD player by pressing the CD«TAPE»TUNER button
several times until lan appears on the display.
2 Open the tray by pressing the OPEN-CLOSE button.
3 Insert an audio CD (printed side up) and close the tray by pushing
it gently or pressing the OPEN-CLOSE button again.
-► The CD player starts and scans the contents list of the CD.
-► Display indication: the total number of tracks and the total
playing time. After that the CD player stops.
4 Press the PLAY-PAUSE HI button to start CD playback.
-► Display indication: the current track number and the elapsed
time of the current track.
5 Press the STOP ■ button to stop CD playback.
-► Display indication: the total number of tracks and the total
playing time.
6 You can interrupt CD playback by pressing PLAY-PAUSE ►!!.
Continue CD playback by pressing the button again.
-► Display indication: the time of the current position flashes.
Notes: CD playback will also stop If:
- you open the tray;
- you push the POWER button or
- the end of the CD is reached.
When you make a mistake in operating the CD player or the CD
player cannot read the CD.
-► the display indicates (see TROUBLESHOOTING).
nu ir
t ___ I 11: lb
U D.n 1
i l_-U I
I—
—i lio-uuf
C
r r o r
12