Philips 312123521121 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How
TO U
se
the
T
uner
M
ode
C
ontrol
T
'he TUNER MODE control allows you to
change the TV’s signal input to either
ANTENNA, CABLE or AUTO mode. It’s
important for the TV to know what type of
signal to look for. (From a Cable TV signal or
a normal Antenna signal.) In the AUTO
mode, when the AUTO PROGRAM feature is
activated, the TV will automatically choose
the correct mode.
1
2
3
4
5
6
Press the MENU button on the
remote to show the on-screen menu.
Press the CURSOR UP or DOWN
buttons to scroll through the on-screen
menu until the word INSTALL is
highlighted.
Press the CURSOR RIGHT button
to display the INSTALL menu fea
tures.
Press CURSOR UP or DOWN but
tons to scroll the Install features until
the words TUNER MODE is high
lighted.
Press the CURSOR RIGHT button
to select either ANTENNA, CABLE,
or AUTO mode.
When finished, press the SYSTEM
MENU (OSD) button to remove the
on-screen menu from the TV’s screen.
H
elpful
H
int
When CABLE is selected, channels 1-125
are available.
When ANTENNA is selected, channels 2-
69 are available.
When AUTO is selected, the TV will auto
matically set itself to the correct mode
based on the type of signal it detects when
the AUTO PROGRAM feature is activated.
8