Philips G96SVCAA01 - Manual (Page 3)

S kttinc ; the R emote to W ork VCR s
y our remote control is set to
work your TV and many
infrared remote ( I R ) control VCRs.
However, an easy one-time step
may be necessary before the remote
will work your VCR.
Try this initial check to see if going
on to the following section is neces­
sary.
[ BEQINi
Slide the switch on the remote
to VCR.
Point the remote toward the
VCR and press the VCR POWER
button.
Does the remote turn on the
VCR? If YES, ^ and try the other
VCR buttons on the remote, if they
also work the VCR, then the remote
is ready and no further steps are
needed.
If NO, continue...
oOOO
"^OOO
ooo
“®OS
First look up a TWO-
DIGIT remote code
number for your brand
VCR before going through the
simple "1,2,3" steps (on the fol­
lowing page).
continue to next page
_ Remember, if more than
• one number is listed, you may
have to try more than the first two-
digit code given in order to locate
your VCR's remote code.
VCR REMOTE VCR REMOTE
BRANP CODE NO. BRAND CQPENQ.
Akai 24, 25, 36 Panasonic 01,02, 52
Capehart 33 Philips 00,05
Conoid 13 Philips Video CD 37
Curtis Mathes 42 RCA 04, 32, 42, 43,44
Daewoo 33 Samsung 22, 30
Emerson 20,31,34,40 Sansui 49
Fisher 06,07 Sanyo 13
Goldstar 23 Sears 08
Go Video 45,46 Sharp 11, 12
Hitachi 03,51 Shin tom 35
JVC 14,47,48 Sony 09, 10,41
Magnavox 00, 05 Teknika 26
Matsushita 01,02 Toshiba 18, 19
Mitsubishi 16, 17, 38, 39, 50 Video Concepts 29
Multi tech
NEC 27,28
21
Zenith 15