On screen display, Selecting tv channels, Volume control – Philips 14PT136B/58W User Manual
Page 5: Operation, Menu on screen, O a o
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operation
© 0 @
O
o a o
□ :
d
On Screen Display
The On Screen Display (OSD) information allows you to see the program number on which a
TV channel is stored, the timer status and a moving bar if the volume is adjusted,
o Press C±1 to display information on the screen,
o Press O again to switch off information.
Selecting TV channels
o Press
P
— or + or press one or two digit buttons on the remote control.
To select a program number from 0 to 9 press one digit button.
To select a program number from 10 to 69 you must press two digit buttons in less than
4
seconds.
or
o Press — or + on the TV.
Volume control
o Press — or + on the remote control.
o Press iQC to switch off the sound,
o Press iQC again or -¿3 + to switch on the sound.
Menu on screen
With the menu on the screen you can change and store the picture and sound settings.
You can also set the timer.
When you switch on your TV, the picture and sound settings have certain values. These values
are initially stored by the factory. Using the menu on screen you can change these values. If you
store these values (by pressing the two buttons ^ and O simultaneously after a change), the
TV will switch on with your stored picture and sound values..
If you w ant to leave the m enu, for exam ple after changing the contrast setting, you can either w ait
approxim ately 10 seconds or continue to press the M EN U button until the m enu disappears from the
screen.
The stored picture and sound values can also be recalled by pressing
P P.
Press MENU.
VOLUME appears, adjust the volume by pressing — or +.
If you want to store this setting press the two buttons ^ and O simultaneously.
Press MENU again.
BRIGHTNESS appears, adjust the brightness by pressing — or +.
If you want to store this setting press the two buttons 0 and O simultaneously.
Press MENU again.
CONTRAST appears, adjust the contrast by pressing — or +.
If you want to store this setting press the two buttons 0 and
Press MENU again.
SHARPNESS appears, adjust the sharpness by pressing — or +.
If you want to store this setting press the two buttons 0 and O simultaneously.
Press MENU again.
COLOUR appears, adjust the colour by pressing — or +.
If you want to store this setting press the two buttons 0 and O simultaneously.
Press MENU again.