Philips CD 335 - Manual (Page 8)

PROGRAMMING
3
(O
(A
3"
You can store 20 tracks from each CD in any re­
quired sequence in a programme. If you exceed
the maximum of 20 tracks, FULL lights up.
STORING A PROGRAMME
(K TRACK ►! and PROGRAM)_____________________
• Close the CD compartment by hand or by
pressing OPEN/CL(ose).
- The display shows the number of tracks and
the playing time of the CD.
• Press W or !◄ until the first track number you
wish to programme appears under TRACK.
• Now press PROGRAM within 8 seconds.
- PROGRAM lights up, followed by a P (for Pro­
gramme); the number has now been stored in
the player's memory.
• Select the other track numbers required and
store each track by pressing PROGRAM.
- The number of tracks and the playing time of
the programme will be shown under TRACK
and TOTAL TIME (for 2 seconds).
STORING A PROGRAMME USING SCAN
• Press SCAN before or during play.
- If the CD compartment was open, it will now
close.
- SCAN lights up and the first 10 seconds of
each track are played in turn; ten seconds are
counted down each time under TIME.
• Press PROGRAM at each track you wish to in­
clude in the programme.
- The player immediately starts to play the first
10 seconds of the next track.
• Press PLAY/REPLAY to play the programme.
CHECKING THE PROGRAMME (PROGRAM)
• Press PROGRAM before, during or after
programmed play.
- All the track numbers appear in the program­
med sequence on the display.
PLAYING THE PROGRAMME (PLAY/REPLAY)
• Press PLAY/REPLAY.
- £> lights up and play begins with the first num­
ber of the programme.
All keys can be used during programmed play.
Searching for a passage is limited to within the
track being played.
ERASING A PROGRAMME
(STOP/CP or OPEN/CL)
• Press STOP/CP twice, or, if the CD has already
stopped, just once; you can also press OPEN/-
CL(ose) straight away.
- The programme has now been erased.
ERASING A TRACK FROM A PROGRAMME
(K TRACK H and PROGRAM)_______________________
• Press ►! or !◄, before or after programmed
play, until the number you wish to erase ap­
pears on the display.
• Press PROGRAM iv/f/j/n Sseconete.
- The Pafterthe number disappears; the number
has now been erased.
- The remaining tracks and their playing time are
shown on the display.