Philips CD602 - Manual (Page 7)

Operation
Repeat Play
If at any time you wish to listen to a disc or
programme over and over again, the RE­
PEAT function will allow you to do so.
The whole disc
• Press REPEAT on the unit.
- The REPEAT indicator lights up.
• Press PLAY/PAUSE ►!!.
- The ► PLAY indicator lights up.
- The contents of the disc or program
will be replayed after the last track of
the disc.
• Press REPEAT to cancel the repeat func­
tion.
- The REPEAT indicator light goes out.
- Play continues as normal.
A particular track
• Press STOP«.
• Press REPEAT on the unit.
- The REPEAT indicator iights up.
• PressM< orw briefly {less than 0.5 second)
to locate a desired track.
• When you have found the correct track
number, press MEMORY to store it in the
memory.
- The indicator lights up..
• Press PLAY/PAUSE ►!!.
- The ► PLAY indicator lights up.
- The chosen track will be played con­
tinuously.
• Press REPEAT to cancel the repeatfunc-
tion.
- The REPEAT indicator light goes out.
- Piay continues as normal.
The whole programme
• Press REPEAT on the unit.
- The REPEAT indicator lights up.
• Program the tracks to be played as
described under Programming.
• Press PLAY/PAUSE ►!!.
- The ► PLAY indicator lights up.
- The contents of the disc or program
will be replayed after the last track of
the programme.
• Press REPEAT to cancel the repeat func­
tion.
- The REPEAT indicator light goes out.
- Play continues as normal.
Starting piayback from an index within
a track at STOP mode (Applicable only
for compact discs with index-encoded
tracks)
• PressM^ or^w briefly (less than 0.5 second)
to locate a desired track.
• When you have found the correct track
number, press « or ►► to search for the
desired index number.
- The chosen index number flashes on
the display.
• Press PLAY/PAUSE ►!!.
- Playback starts with the beginning of
the index number.
- The index number disappear and the
display shows the chosen track
number.
Selecting a different track during
playback or programmed play
• Press!« or>« briefly (lessthan 0.5second)
until the required track number appears in
the display.
- Shortly after this, the chosen track will
start playing.
Starting again with the track that is
currently playing
• Press « briefly (less than 0.5 second).
- The track will be started again from the
beginning.
Searching for a passage during
playback or programmed play
• Hold «or» pressed down to search for
the required passage. If you release the
button, play will continue.
• When « or ►► is pressed down, the
display will show the elapsed playing time
(either S3' to ’H’ or 'O' to '53') in seconds
only.
Note:
This is an "AUDIBLE SEARCH".
The volume will automatically be reduced to
a low level during search operation and will
return to its normal level when the search
button is released.
£ .2
"o)
c
UJ