Philips CD 634 - Manual (Page 8)

OPERATION PROGRAMMING
REPEATING A PASSAGE (A-B) TAKE-OUT PROGRAMMING
• During play press A-B at the required starting point.
- A lights up, while B flashes.
• Press A-B again at the required stopping point.
- B now lights up.
- The passage between points A and B will now be replayed
continuously.
• Press A-B again if you wish to return to normal play.
To find the starting and stopping points quickly, you can use
CURSOR » and «1 CURSOR.
REPEATING THE CD (REPEAT)
• Press REPEAT before or during playback.
- REPEAT lights up and the CD will now be repeated continuously.
• Press REPEAT again to stop the CD being repeated.
STOPPING PLAY (STOP/CM, OPEN or OPEN CLOSE)____________________
• Press STOP/CM if you merely wish to stop play.
• Press OPEN or OPEN CLOSE if you wish to stop and take out the
CD.
• Key in the numbers you wish to omit; every number you key in will
be erased directly.
- Each time you key in (= erase) a track number, the remaining
tracks and their playing time will be shown under TRACK and
TRACK TIME.
- The track number indicator always shows which tracks remain for
inclusion in your program.
You can also key in (= erase) the tracks numbers during play.
STORING A PROGRAM USING SCAN_______________________________
• Press (FAST and) SCAN before or during play.
- (FAST) SCAN(NING) lights up.
- The first (10 or) 20 seconds of each track are played in turn.
• Now you can compile your program:
Add-in
• Press S(tore) at each track you wish to include in the program.
- The programmed numbers appear on the track number indicator.
Take-out
• Press C(lear) at each track you do not wish to include in the
program.
- The erased numbers disappear from the track number indicator.
PROGRAMMING
CHECKING THE PROGRAM (REVIEW)
Before storing a program first select either:
ADD-IN programming: store the tracks which are to be played and
their order. Up to 30 tracks can be stored in this way. Or:
TAKE-OUT programming: erase the track numbers you do not want
to hear. Now you can store as many numbers as there are tracks
on the CD.
• Press PRESET.
• Press S(tore) until POS PROG or DEL PROG appears.
• Select POS PROG (= add-in) or DEL PROG (= take-out) by
using CURSOR >.
• Press S(tore).
• Press PRESET.
• Set the player to the direct programming mode (DIRECT PROG)
using PROG/PLAY.
NOTE!
- Index numbers cannot be stored.
- Once you have started programming in one of the two ways, you
can no longer switch to the other way.
ADD-IN PROGRAMMING____________________________________________
• Key in the required numbers; every number you key in will be
directly included in the program.
- Each time you key in (= store) a track number, the number of
tracks and the playing time of your program will be shown under
TRACK and TRACK TIME; if the program is longer than 99 minutes
and 59 seconds, then —; — lights up.
- The track number indicator always shows which numbers have
been stored.
You can also store the tracks during play; as soon as you have
entered (= stored) the first number, play continues with the
programmed track numbers.
• Press REVIEW prior to, during or after programmed play.
- PROG(ram) REVIEW lights up; all the numbers appear in the
programmed sequence under TRACK.
NO PROGRAM lights up if no track numbers have yet been stored.
PLAYING THE PROGRAM (PLAY/REPLAY)_____________________________
• Press PLAY/REPLAY.
- PROGRAM PLAY lights up and playback starts with the first
number of the program.
All buttons (except EDFT, PRESETS, TITLE and INFO) can be used
during programmed play.
Search for a particular passage is only possible within the track
being played.
As long as the player is in the direct programming mode (DIRECT
PROG) you can continue to add to the program during playback.
ERASING A PROGRAM (STOP/CM, OPEN or OPEN CLOSE) •
• Press STOP/CM twice or, if the CD has already stopped, just
once; you can also press OPEN or OPEN CLOSE straight away.
- The program has now been erased.
ERASING A TRACK FROM THE PROGRAM (CLEAR)_________________
• Set the player to the direot programming mode (DIRECT PROG)
using PROG/PLAY.
• Press REViEW before or after programmed play (STOP mode).
- PROG(ram) REVIEW lights up; all the numbers appear in the
programmed sequence under TRACK.
• Press C(lear) as soon as the number you wish to erase appears.
- The number disappears from the number indicator; it has now
been erased.