Philips CD 634 - Manual (Page 6)

OPERATION
18 EDIT
Entering the recording time when making a tape recording.
19 REVIEW
Checking a program.
20 «1 CURSOR and CURSOR 1»
-
Fast search to a particular passage; when used in conjunction
with FAST, the search speed is increased.
- Moving the cursor when entering ’names’ and personai
preferred settings.
21 PROG(ram)/PLAY
Direct programming or immediate selection and playback of
track numbers.
22 Remote eye
Receives the signais from the remote control.
23 SCAN
Automatically playing the beginning of each track.
24 PHONES
Connecting headphones.
25 RANDOM
Playing in random order.
26 VOL(ume)
Adjusting the volume when listening with headphones.
27 PAUSE
Interrupting play.
REMOTE CONTROL
- OPEN CLOSE
Opening and closing the CD compartment.
-O INDEX D
Selecting another index number during play.
Selecting an index number to start play with.
- T VOLUME A
Adjusting the sound level when the player is connected via the
VARIABLE output to an amplifier or HiFi system without its own
remote control.
- O TRACK [> = PREVIOUS and NEXT.
- Q SEARCH [> = «1 CURSOR and CURSOR 1».
DISPLAY (Fig. 3)
PLAY DIRECT - Lights up when the player is set to the direct play
mode.
DIRECT PROGR(am) - Lights up when the player is set to the direct
programming mode.
TRACK - Indicates:
- what track is being played;
- the number of tracks on the CD;
- the number of tracks in a program.
TRACK TIME - Indicates:
- the elapsed playing time of the track being played;
- the total playing time of the CD or a program.
REM TRACK TIME - Indicates the remaining playing time of the
track being played.
TOTAL REM TIME - Indicates the remaining playing time of the CD
or a program.
MODE - Indicates the following functions:
- FTS MEMO 1 or FTS MEMO 2
Flashes after the FTS 1 or FTS 2 button has been pressed.
Lights up when a program from the FTS memory is played.
- TITLE
Lights up after the TITLE button has been pressed.
- RANDOM
Lights up when the tracks are played in random order.
- REPEAT
Lights up when you repeat a CD or program.
- A-B
Lights up when a passage is repeated.
1-20 track number indicator - Shows the number of tracks on the
CD.
+20 - Lights up when there are more than 20 tracks on the CD.
READING - Lights up when you switch the player on.
8 CM DISC - Lights up when a 3" (8-cm) CD is loaded.
12 CM DISC - Ughts up when a 5" (12-cm) CD is loaded.
PLAY- Lights up during play.
PAUSE - Lights up when play is interrupted.
GO INTO STOP- Lights up if you try to activate a function for which
you must first stop play.
GO INTO PLAY- Lights up if you try to activate a function for which
you must first start play.
ERROR - Lights up if you make a mistake when operating the
player.
PLAYBACK (PLAY/REPLAY) •
• Press ON/OFF to switch the player on.
-
READING lights up. followed by INSERT DISC.
• Open the CD compartment by pressing OPEN or OPEN CLOSE
(remote control).
- TTfAY ОРЕЛ/lights up. followed by INSERT DISC.
• Insert a CD, printed side up (Fig. 4) and close the compartment.
- TRAY CLOSE \\gh\s up. followed by READING.
- 8 CMDISCor 72 C/WD/SC lights up and the number of tracks and
the playing time of the CD are shown on the display; DISC READY
lights up.
• Press PLAY/REPLAY.
- PMYlights up and playback starts.
You can also press PLAY/REPLAY immediately after inserting the
CD; the compartment then closes automatically.
- The number indicator shows how many tracks are on the CD;
when a track has been played its number disappears.
- The track being played is always shown under TRACK and its
elapsed playing time is shown under TRACK TIME.
- Play stops after the last track .
• Press ON/OFF to switch the player off.
ADJUSTING THE SOUND LEVEL (T VOLUME A)_____________
IMPORTANT!
Use the T VOLUME A buttons only if the player is connected via
the VARIABLE output to an amplifier or HiR system without its own
remote control.
• Hold T VOLUME (remote control) pressed down.
- ЮШ/WE lights up.
- The output signal from the player will now decrease gradually; the
successive steps are shown on the display (’8’ to ’1’).
• Release the button as soon as the required sound level is
obtained.
• If you hold VOLUME A (remote control) pressed down, the
output signal from the player will increase again gradually to the
maximum level (’8’).
• Release the button as soon as the desired sound level is
obtained.