Philips CD 634 - Manual (Page 7)

OPERATION
ADJUSTING THE BRIGHTNESS OF THE DISPLAY (DIM)
• Hold DIM pressed down.
- BRIGHTNESS lights up.
- The brightness of the display will now decrease gradually: the
successive steps are shown on the display (’8’ to ’1’).
• Release the button as soon as the required brightness level is
obtained.
• If you press DIM again the brightness will increase up to the
maximum level (’8’).
CALLING UP OTHER TIME INFORMATION (TIME)___________________
• Press TIME whenever you want to know the remaining playing
time of the track being played (REM TRACK TIME).
• Press TIME again if you wish to know the remaining playing time
of the entire CD (TOTAL REM TIME).
• Press TIME again if you wish to return to the eiapsed playing time
indication (TRACK TÍME).
GOING BACK TO THE BEGINNING OF A TRACK
(PLAY/REPLAY)___________________________________________________________
• Press PLAY/REPLAY.
- The track starts again from the beginning.
SCANNING A DISC (SCAN)
• Press SCAN before or during piay.
- If the CD compartment was open, it will now close.
- SCANNING lights up and the first 20 seconds of each track are
piayed in turn.
• When the player reaches a track which you wish to hear in full,
press PLAY/REPLAY.
• Press SCAN again if you wish to return to normal play.
If you only wish to hear the first 10 seconds:
• Press FAST and then SCAN.
- FAST SCAW lights up.
- Now only the first 10 seconds are played.
STARTING WITH A PARTICULAR TRACK (’1-0 )____________________
• Set the player to the direct play mode (PLAY DIRECT) using
PROG/PLAY.
• Key in the required number (numbers consisting of two figures
must be keyed in within 2 seconds).
- Play starts from the selected track.
You can also select the number by using NEXT or PREVIOUS and
then pressing PLAY/REPLAY.
WRONG TRACK lights up if you select a non-existent number.
SELECTING ANOTHER TRACK DURING PLAY (’1-0 )_______________
• Key in the desired number (numbers consisting of two figures
must be keyed in within 2 seconds).
- The music stops and a moment later the selected track begins
to play.
WRONG TRACK will light up if you select a non-existent number.
You can also select the number by using NEXT or PREVIOUS.
DISC END will light up if you press NEXT while the last track is
playing.
DISC BEGINw\\\ light up if you press PREVIOUS while the first track
is playing.
SELECTING ANOTHER INDEX NUMBER DURING PLAY
(<] INDEX!»______________________________________________________________
IMPORTANT!
Index numbers are not indicated specifically on the display.
If the parts of a track have index numbers, this will be specified in
the track list in the CD holder.
• Press INDEX D or <3 INDEX (remote control) until the required
index number appears on the display.
- The music stops and a moment later the selected index number
begins to play.
If the index number selected does not exist, play will start again at
the beginning of the current index number.
SEARCHING FOR A PASSAGE DURING PLAY
(<1<1 CURSOR and CURSOR »)___________________________________________
•
• Hold • Hold CURSOR l>> down to search forwards to the end.
If you reach the end of the last track and release CURSOR W>, play
will resume a few seconds before the end of the disc.
At this search speed sound is audible.
Fast search for a passage:
• Press FAST.
- FAST lights up.
• Press again.
At this search speed no sound is audible.
BEGINNING WITH A PARTICULAR INDEX NUMBER
«3 INDEX D and PAUSE)__________________________________________________
• Set the player to the direct play mode (PLAY DIRECT) using
PROG/PLAY.
• Press PAUSE.
• Select the track number you wish to start with.
• Then press INDEX D or <3 INDEX (remote control) until the
desired index number appears on the display.
• Press PAUSE again.
- Play starts from the selected index number.
If you select a non-existent index number, playback starts with the
selected track.
PLAYING IN A RANDOM ORDER (RANDOM)________________________
• Press RANDOM before or during play.
- If the CD compartment was open, it will now close.
- RANDOM lights up and all the tracks are now played in a random
order.
• Press RANDOM again if you wish to return to normal play.
If you press PREVIOUS, you will return to a track which has already
been played.
If you press NEXT, you will select any one of the following tracks.
If you press REPEAT, the tracks will be repeated in a different order
each time, although the first track played will always be the same.
The digit buttons ’1-0’ cannot be used during random-order play.
INTERRUPTING PLAY (PAUSE)________________________________________
• Press PAUSE.
- PAUSE lights up.
• Press PAUSE again to restart.