Philips 20PV 184 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Automatic channel search
Allocating channel numbers
Q Switch on with the
I
buttons Holland
STOP И I button. Press the menu
!ЖИ simultaneously.
0 Select and confirm the line 'AUTO STORE'.
The 'Automatic channel search' function starts.
AUTO STORE
PRESS «»TO STOP
SEARCH
PLEASE WAIT
CHAIINELS FOUtlD:
1
mill................................
}
Note; Automatic Channel Installation (ACI), only for sets
with TELETEXT:
Some cable companies or broadcasters offer the pos
sibility to install TV channels automatically with 'ACT.
Information about the installation offered and howto
select it, will appear in the display.
This set will recognize and install TV channels with 'ACI'
automatically.
TV channels will be stored from programme number 1
onward.
If 'ACT cannot identify a TV channel, you can search for
It
using the method as described in the section 'Manual
channel search'.
* If the 'Automatic channel search' function is ac
tivated, any previously programmed TIMER blocks will
be cleared.
You can store up to 69 TV channels.
^ Switch on with the I STOPB | button. Press the menu
buttons I I and I ^ I simultaneously.
Q
Select and confirm the line 'SORT'.
SORT
*
w
C-21
FROM
POl
TO
P02
STORE
Q
Wait until all TV channels have been stored.
All TV channels will be stored from programme number 1
upward.
How to search for a TV channel manually, you can read in
chapter 4 'SPECIAL FEATURES' in the section 'Manual
channel search'.
Q
On the TV screen, in the line 'FROM', select the TV
channel to which you want to allocate a programme
number, e.g.: 'P 01'.
Q
In the line 'TO', select the required programme number,
e.g.: 'P 02'.
^ Select and confirm the line 'STORE'.
The allocated TV channels will be exchanged.
0 Repeat steps 0to ©until you have allocated a pro
gramme number to all the required TV channels.
To finish, press the I
menu
| button twice.