Power supply – Philips AZ 7583 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
POWER SUPPLY
Power adapter
(supplied or optionally available)
AY 3160 power adapter, 4.5 V/400 mA direct current, positive pole to the center pin
1
Make sure that the local voltage corresponds
to the voltage of the adapter.
2 Connect the adapter to the player's
4.5 V DC socket and to the wall outlet.
Note: -Use only the AY3160 adapter. Other
products may damage the set.
-No acoustic feedback is avaiiabie when
using the adapter.
-Always disconnect the adapter when you are not using it.
Batteries, type LR6, UM3, or AA
(supplied or optionally available)
Open the battery compartment and insert 2
alkaline batteries or the rechargeable battery
pack.
Typical playing times under normal conditions:
Alkaline batteries: 12 hours (ESA off)
10 hours (ESA on)
Remove batteries if they are dead or if the CD
player is not to be used for a iong period of time.
Note: The battery condition wiil be indicated in the dispiay:
-Full batteries: no indication.
-Weak batteries: (s - symbol flashes. This symbol is not avaiiabie when
rechargeable batteries are used.
-Dead batteries:
-symbol flashes and the message 6 appears.
-Replace the batteries or connect the power adapter.
Batteries contain chemical substances. Therefore, they should be disposed
ofproperiy.