Philips CD 824 - Manual (Page 9)

FAVOURITE TRACK SELECTIONS (FTS)
For each CD you can store two programmes in the
player's permanent (FTS) memory.
Your favourite track selection(s) of a given CD can
then be called up and played whenever you wish.
The selections will remain stored in the FTS memory
even if you play the entire disc or compile a different
programme from it.
The number of CDs which can be stored in the FTS
memory depends on the number of tracks in each
programme.
STORING A FAVOURITE TRACK SELECTION
(FTS and STORE)_______________________________________
• Compile your programme as described in the
'PROGRAMMING' section (add in or take out).
• Press FTS 1.
- FTS MEMORY 1 starts flashing.
• Press S(tore).
- The ranking number of this programme appears
on the display.
- The selection is now stored in the FTS 1 memory
under this number.
If you wish to store a further selection from the
same disc:
• Press STOP/CM (if you have stored the first
programme during playback you must press
STOP/CM twice).
• Compile the second programme.
• Press FTS 2.
- FTS MEMORY 2 starts flashing.
• Press STORE.
- The ranking number of this programme appears
on the display.
- The selection is now stored in the FTS 2 memory
under this number.
NOTE!
- If a selection of a particular CD has already been
stored, then it is automatically erased and the new
selection is stored under the old ranking number.
- If ERROR appears, then the FTS memory is full: you
must erase one or more old FTS programmes to
make room to store the new programme.
FTS PROGRAMMED PLAY
(FTS and PLAY/REPLAY)
• Press FTS 1 or FTS 2.
- FTS MEMORY 1 or FTS MEMORY 2 starts flashing.
• Press PLAY/REPLAY.
- The chosen selection will now be played.
• Press STOP/CM twice if you wish to revert to
normal play.
All keys (except PRESETS, STORE and CLEAR) can
be used while a favourite selection is being played.
Search for a passage is only possible in the track
which is being played.
ERASING A FAVOURITE TRACK SELECTION
(CLEAR)_______________________________________________
• Press FTS 1 or FTS 2.
- FTS MEMORY! or FTS MEMORY2 starts flashing.
• Press NEXT or PREVIOUS until the ranking number
appears on the display.
• Hold C(lear) pressed down.
-
CLr appears on the display followed, a few
moments later, by —.
- The selection has now been erased.
If you do not know the ranking number:
• Load the CD and close the CD compartment.
• Press FTS 1 or FTS 2.
- FTS MEMORY! or FTS MEMORY2 starts flashing.
• Press REV(iew).
• The ranking number appears on the display.
• Hold C(lear) pressed ciown.
- CLr appears on the display followed, a few
moments later, by —.
- The selection has now been erased.
ERASING THE ENTIRE FTS MEMORY
(REPEAT and CLEAR) •
• Press FTS ! or FTS 2.
- FTS MEMORY! or FTS MEMORY2 starts flashing.
• Press REV(iew).
• A ranking number appears on the dispiay.
• Pres REPEAT and then press C(lear) immediateiy.
• Hold both buttons pressed down.
- ALL lights up, foliowed a few moments later by —.
- The entire FTS memory has now been erased.