Philips CD 824 - Manual (Page 7)

OPERATION
SEARCHING FOR A PASSAGE DURING PLAY
(«1 U > ) ______________________
• Hold
beginning.
• Hold M> down to search forwards to the end.
If you reach the end of the last track and release W>,
play will resume a few seconds before the end of the
disc.
At this search speed sound is audible.
Fast search for a passage:
• Press FAST.
- FAST lights up.
• Press again.
At this search speed no sound is audible.
STARTING WITH A PARTICULAR TRACK ('1-0')
• Close the CD compartment by pressing OPEN
CLOSE (remote control).
• Set the player to the direct play mode (PLAY
DIRECT) using PROG/PLAY.
• Key in the required number (numbers consisting of
two figures must be keyed in within 2 seconds).
- Play starts from the selected track.
You can also select the number by using NEXT or
PREVIOUS and then pressing PLAY/REPLAY. ER­
ROR lights up if you select a non-existent number.
PLAYING THE DISC IN RANDOM ORDER
(RANDOM)___________________________________________
• Press RANDOM before or during play.
- If the CD compartment was open, it will now close.
- RANDOM lights up; all the tracks are now played
in a random order.
• Press RANDOM again if you wish to return to
normal play.
If you press PREVIOUS, you will return to a track
which has already been played.
If you press NEXT, you will select any one of the
following tracks.
If you press REPEAT, the track will be repeated in a
different order each time, although the first track
played will always be the same.
The digit keys ’1-0’ cannot be used during random-
order play.
SCANNING A DISC (SCAN)
• Press SCAN before or during play.
- If the CD compartment was open, it will now close.
------lights up and the first 10 seconds of each track
are played in turn.
• When the player reaches a track which you wish to
hear in fuil, press SCAN again.
INTERRUPTING PLAY (PAUSE)
• Press PAUSE.
- l> starts flashing.
• Press PAUSE again to restart.
REPEATING A PASSAGE (A-B)
• During play press A-B at the required starting
point.
- A- lights up, while B flashes.
• Press A-B again at the required stopping point.
- -B lights up.
- The passage between points A and B wiil now be
replayed continuously.
• Press A-B again if you wish to return to normal play.
To find the starting and stopping points quickly, you
can use the
REPEATING THE CD (REPEAT)
• Press REPEAT before or during playback.
- REPEAT lights up and the CD will now be repeated
continuously.
• Press REPEAT twice to stop the CD being
repeated.
REPEATING A TRACK (REPEAT)______________
• Press REPEAT twice before or during playback.
- REPEAT starts flashing up and the track will now be
repeated continuously.
• Press REPEAT again to stop the track being
repeated.
STOPPING PLAY
(STOP/CM, OPEN or OPEN CLOSE) •
• Press STOP/CM if you merely wish to stop play.
• Press OPEN or OPEN CLOSE if you wish to stop
and take out the CD.