Setting of each function – Futaba GY501 User Manual

Page 37

Text mode
Original mode

ATA

ETTING

Setting of Each Function

Initial screen at power on

This is the initial screen at power on. When the transmitter power is
off, "*IDLE**" is displayed until the transmitter power is turned on.
After the transmitter power is turned on, "*INIT***" blinks for about
5 seconds to read the reference data. During this period, do not move
the transmitter rudder stick or the helicopter. If the transmitter rudder
stick or helicopter is moved by mistake, the rudder neutral position
will change.

Operation screen display / Power supply voltage display

Normal mode operation

Low battery alarm

Rudder neutral memorization updating

AVCS mode operation

Rudder neutral deviation display