Futaba CDR-5000 Charger - Manual (Page 34)

35
CDR-5000 Functions
Pushing " " and " " keys simultaneously will erase the cursor and move back to the screen of
"AVE", "C" and "T".
Pushing "Graph" or " " key in the "GRAPH Screen Page1" will show the "GRAPH Screen Page2".
Pushing " " will show "GRAPH Screen Page9".
[GRAPH Screen Page 2 (DIS V-ºC/Time)]
Pushing "Graph" or " " key in the "GRAPH Screen Page1" will show the "GRAPH Screen Page2".
This graph shows the relationship between the discharging time, battery voltage and its temperature.
(Applicable for a battery of 1 to 36 cells) Although no graphs will be shown during charging, the graph
of the previous discharging graph will be shown after discharging is completed in cycle mode.
*The messages on the top of the screen are (from left to right):
Graph type and discharging current appears alternatively. (while discharging)
V: output voltage
B.T: temperature of the battery
The messages on the bottom of the screen are (from left to right):
AVE: an average voltage at discharging
C: discharged amount
T: time consumed for discharging
F: average voltage at first stage
M: average voltage at middle stage
L: average voltage at last stage
These values will be shown on the screen alternatively.
A cursor line vertical to the time axis will appear by pushing " " key.
The cursor line can be moved left and right by pushing " " and " " keys.
*The messages at the bottom of the screen will change when the cursor line appears. From left to right on the bottom
of the screen:
D.L.: output voltage
B.T.: battery temperature
T: the time at the crossing point between the cursor and the time axis
D.L. and B.T. are represented by values measured at the time T. In addition, D.L. and B.T. are represented by the
minimum value and maximum value respectively taken at vicinity of the time T. If the minimum value is not equal to
the maximum value, those values will be shown on the screen one after the other.