Futaba CDR-5000 Charger - Manual (Page 26)

27
CDR-5000 Functions
Over Current Protection
Although the values of charging and discharging current can be set in the "SET-UP" screen, the actual
current during charging or discharging a battery will be limited in accordance with the voltage mea-
sured at the battery terminals by the "Over Current Protection" of CDR-5000.
[Charging current limit at DX]
Although the value of charging current at DX can be set at 0.1A to 12A in the "SET-UP" screen, the
actual charging current will vary depending on a battery voltage measured at its terminals.
18V or less : 12A Max
27V or less : 8A Max
36V or less : 6A Max
43V or less : 5A Max
54V or less : 4A Max
62V or less : 3A Max
[Discharging current limit at DX]
Although the value of discharging current at DX can be set at 0.1A to 40A in the "SET-UP" screen, the
actual discharging current will vary depending on a battery voltage measured at its terminals.
2.4V or less : smaller than 40A
7.5V or less : 40A Max
8.5V or less : 35A Max
10V or less : 30A Max
12V or less : 25A Max
15V or less : 20A Max
20V or less : 15A Max
30V or less : 10A Max
40V or less : 7.5A Max
50V or less : 6A Max
60V or less : 5A Max
greater than 60V : 4A Max
[Charging current limit at TX/RX]
The value of charging current at TX/RX can be set at 0.05A to 2A in the "SET-UP" screen, and the
actual charging current will be nearly equal to the set value regardless of a battery voltage measured at
its terminals.
[Discharging current limit at TX/RX]
Although the value of discharging current at TX/RX can be set at 0.1A to 5A in the "SET-UP" screen,
the actual discharging current will vary depending on a battery voltage measured at its terminals.
10V or less : 5A Max
greater than 10V : 3A Max