Futaba 8JN - Manual (Page 3)

• FEATURES
This radio control set has been developed for FAI RC
acrobatic F3A use. Please read this manual thoroughly before
using your set.
Transmitter FP-T8JN
•The transmitter employs a module system. The
frequency band and modulation method can be
changed with one touch.
•The servos can be operated without transmitting
radio signals. Wire operation is possible by using
the special cord furnished with the set.
•A reversing device is self-contained. The servo
can be reversed by switching a switch.
•An aileron and elevator angle switching device is
self-contained.
•Open gimble sticks provide maximum feel.
•An travel adjuster is self-contained.
Servo travel is independently adjustable to the left
and right (up, down).
•Elevator and flap mixing. Amount and direction
are variable. Release switch is also provided.
•Flap and spoiler mixing. Amount and direction
are variable. Release switch is also provided.
•Two roll buttons. Elevator angle and direction
can be freely adjusted.
•Two snap roll buttons. Aileron, elevator, and
rudder angle and direction can be freely adjusted.
•Throttle button. Throttle half can be freely
adjusted.
•Hook band is standard. Since this transmitter has
numerous accessories, hanging it from your neck
with this band makes operation easier.
•Buit-in antenna. Locked when pulled up one stage.
stage.
•Human engineered exterior. Superior operability.
Receiver FP-R8J
•Module type. The frequency band and modulation
method can be changed with one touch, the same
as the transmitter.
•Eight channels packed in a compact, lightweight,
and rugged case.
•All connectors have trouble-free, metal plated
pins. Housing is also special and provides an ex-
cellent feeling. Resistance against vibration and
shock has been improved substantially.
•One-stage FET RF amplifier. Two signal charac-
teristic is superb.
•Servos can be controlled without transmitting by
connecting the transmitter directly to a "C"
terminal.
FP-S121, FP-S121H and FP-S121G
servos
•Compact, lightweight, rugged.
•Powerful output torque (3kg-cm).
•Output shaft is supported by two ball bearings to
assure excellent neutral characteristics and ample
durability.
•Waterproof, dustproof type.
•Special 16/o micromotor.
•High-speed servo (FP-S121 H) is also available.
•Standard equipment includes two 8-channel,
6 servo landing gear servos (FP-S121G).