Futaba 7C 2.4GHz - Manual (Page 62)

GOAL of EXAMPLE: STEPS: INPUTS:
Note: Radio shows progress on screen as the model type is being changed and beeps once upon completion. If the power switch is turned off prior
to completion, the data will not be changed.
62
Change the MODEL TYPE of model #3
from aircraft to 120 degree CCPM with 2
servos working in unison for collective
pitch and aileron [HELI(HR3) ].
Where next?
Confirm you are currently using the
proper model memory. (example: 3)
Open PARAMETER submenu.
Change to the desired MODEL
TYPE(example, HR3.)
Confirm the change.
Close.
On home screen, check model name
and # on top left and right.
If it is not the correct model (example:
3), see MODEL SELECT, p. 25.
for 1 second.
(If ADVANCE, again.)
to PARAMETER.
to HR3.
for one second.
"sure?" displays. to confirm.
If a single servo is not operating properly, REVERSE: see p. 30.
If a control is operating backwards (i.e. Elevator), see SWASH AFR, p. 63.
If unsure see SWASH AFR.