Futaba 3PL 2.4GHz FHSS - Manual (Page 18)

18 3PL-2.4G Functions
Steering End Point Adjustment (EPA-CH1)
Channel-3 End Point Adjustment (EPA-CH3)
Steering EPA
Adjust the travel of the servo
while operating the steering
wheel each way.
Range: 0 - 120%
(Left side) (Right side)
Use this function to limit the servo
movement to the left or right. The
servo travel to each side can be
independently adjusted. This
feature will compensate for any
difference in right or left turning
a n g l e s o r r a d i u s d u e t o t h e
characteristics of your model.
Channel-3 EPA
Adjust the travel of the servo
while operating the channel-3
switch each way.
Range: 0 - 120%
(Left side) (Right side)
Use this function to limit the servo
movement to the left or right. The
servo travel to each side can be
independently adjusted.
ｎWARNING
ｊ Be sure that the steering linkage does not bind or come in contact with any
suspension parts or arms. If unreasonable force is applied to the servo, the
servo may be damaged and result in loss of control.
ｎWARNING
ｊ Be sure that the linkage does not bind or come in contact with any parts
or arms. If unreasonable force is applied to the servo, the servo may be
damaged and result in loss of control.
Throttle End Point Adjustment (EPA-CH2)
Throttle EPA
Adjust the travel of the servo
while operating the throttle
trigger each way.
Range: 0 - 120%
(Forward side)
(Brake side)
This function is used to adjust the
forward and brake side servo
travel. Each direction can be
adjusted independent of each
other. Use this feature to set the
throttle servo travel.
ｎWARNING
ｊ Be sure that your throttle linkage does not apply excessive force to the servo.
If your linkage installation causes an unreasonable amount of force to be
applied to the servo, the servo may be damaged and result in loss of control.