Futaba 3GR 2.4GHz - Manual (Page 56)

57
Functions
Throttle Neutral Adjuster / THR-NT
You can select your desired throttle neutral position. (7:3 or 5:5)
Neutral position selection
1 Use the (+) or (-) buttons to select the neutral position. ("7-3" or "5-5")
2 When ending selection, once turn off the power switch before use.
Calling the setup screen
1. Turn on the power switch
while pressing "SEL" key. 2. Next, use "SEL" key to select
the desired function screen.
Neutral position
"7-3": 7:3
"5-5": 5:5
Stick lever adjustment
- Always adjust the throttle stick lever position according to the above settings.
1 Remove the four transmitter rear case screws and remove the rear case.
2 Adjust the neutral position of the throttle stick ac-
cording to the above neutral position selection by
pressing the throttle stick in the arrow direction.
*Press it downward fully and firmly.
3 Close the rear case and tighten the four screws.
7:3 5:5