Futaba 3GR 2.4GHz - Manual (Page 25)

26
Initial Set-Up
- Steering dual rate (DT3) check
At initial set-up, steering dual rate is assigned to digital
trim DT3. Operate the DT3 lever and check if the D/R
value displayed on the screen changes. After checking
D/R, set the steering dual rate to 100%.
- Throttle ATL (DT4) check
At initial setting, throttle ATL is assigned to digital
trim DT4. Operate the DT4 lever and check if the ATL
value displayed on the screen changes. After checking
ATL, set throttle ATL to 100%.
Steering D/R
value
Throttle ATL
position
DT3
DT4