Futaba 3GR 2.4GHz - Manual (Page 24)

25
Initial Set-Up
3. Trims Initial Set-Up
- Steering trim (DT1) check
At initial set-up, steering trim is assigned to digital trim
DT1. Operate the DT1 lever and check if the steering
trim value on the screen changes. After checking the
trim, set the trim value to the center (0) position.
- Throttle trim (DT2) check
At initial set-up, throttle trim is assigned to digital trim
DT2. Operate the DT2 lever and check if the throttle
trim value on the screen changes. After checking the
trim, set the trim value to the center (0) position.
Steering trim
position
Throttle trim
position
DT2
DT1