Fieldmann FDB 2005-E - Manual (Page 13)

EN
MULTI FUNCTION TOOL OPERATING INSTRUCTIONS
13 Accessories | Assembling and operating - installing accessories
WARNING: If any part is missing or damaged, do not plug the tool into the power source or install any
accessory until the missing or damaged part is replaced.
DELIVERED ITEMS
Multi-tool .................................... 1 ks
Scrapers .................................... 2 ks
Saw Blades ............................... 3 ks
Sand Paper Holder ................. 1 ks
Sandpapers .............................. 6 ks
Hex Key ....................................... 1 ks
5. ASSEMBLING AND OPERATING
5.1 INSTALLING ACCESSORIES
All accessories are installed on the multi-tool in a similar manner. For the purposes or describing the accessory
installation, the half circle blade is used.
DANGER! Always remove the plug from the power source before installing or removing accessories or
sandpaper. Failing to remove the plug from the power source may result in the tool accidentally being started
and causing serious injury to the operator.
1. Remove the screw (1) and washer (2) from the accessory holder (3) by turning the screw counter clockwise.
Use the 5mm Hex key (4) if the screw is too tight to be removed by hand (Fig. 1)
Fig. 1