Casio EXILIM EX-FH20 - Manual (Page 72)

72
Using BEST SHOT
8.
Use [4] and [6] to select the subject movement sensitivity, and then
press [SET].
• You can select any one of three sensitivity levels: “High”, “Normal”, or “Low”.
• Move Out CS Setting Guide
• Move In CS Setting Guide
9.
Use [8] and [2] to select the second control panel option from the
bottom (High-speed CS fps).
10.
Use [4] and [6] to select the CS speed setting
you want, and then press [SET].
• You select a value in the range of 1 frame per
second to 40 frames per second for the CS speed.
11.
Use [8] and [2] to select the bottom control panel option (Prerecord
(Still image) Time).
12.
Use [4] and [6] to specify the pre-record time, which is the amount of
time before and after subject movement for which you want to record
images, and then press [SET].
• The approximate number of recordable
CS images will appear on the monitor
screen.
• The “Number of pre-recorded images and
recording time” cannot be set to zero.
High: For a subject that moves out of the boundary quickly
Low : For a subject that moves out of the boundary slowly
High: For a subject that moves into the boundary quickly or for a small subject
(relative to the boundary)
Low : For a subject that moves into the boundary slowly or for a large subject
(relative to the boundary)
CS speed
Number of pre-recorded images and recording time
Number of real-time recorded images and
recording time
Auto shutter point
Remaining snapshot
memory capacity
Number of recordable
CS images
B